US Mag Chrome Wheel Nuts 7/16" Thread


us mag wheel nuts
7/16" Thread

US Mag
Chrome Nut

NO Washer

us mag wheel nuts plus standard washers
7/16" Thread

US Mag
Chrome Nut
With
Standard Washer

us mag wheel nuts plus Cragar washers
7/16" Thread

US Mag
Chrome Nut
With
Cragar Washer

us mag wheel nuts plus Cragar offset washers
7/16" Thread

US Mag
Chrome Nut
With
Cragar Offset Washer

us mag wheel nuts plus oval washers
7/16" Thread

US Mag
Chrome Nut
With
Oval Washer

us mag wheel nuts plus ovel offset washers
7/16" Thread

US Mag
Chrome Nut
With
Oval Offset Washer


Centre and Offset Washers Fitment Explained


A unilug fitment, is a wheel which has an Oval hole and will fit in general 3 different stud patterns, this is normally 5-114.30 5-120.65 and 5-127.00. The below fitment guide is for this type of wheel.

Standard and Crager Washers - Fits wheels, that use a Shank nut and do not have any taper in the wheel.

Cragar Offset - Fits Cragar SS 061 and other unilug wheels, which have a round or no indent in the wheel for the washer to sit in. 5-114.3 and 5-127.00 stud pattern for 5-121 use Standard washers.

Oval Centre- Fits unilug wheels, which have a oval indent in the wheel for the washer to sit in, also can be used on wheels which have no indent to cover up the rest of the hole. 5-120.65 stud pattern.

Oval Offset- Fits unilug wheels, which have a oval indent in the wheel for the washer to sit in, also can be used on wheels which have no indent to cover up the rest of the hole. 5-114.3 and 5-127.00 stud pattern.